Command and Processes Table - U

For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.

These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

� A blue diamond indicates the module is an optional extra for the specified system.

For Macro commands, see here.

Commands - U

Command Name								Description	More Help
undo-last-edit								Undo last modification made to any 3D data type.	Command Help
undo-last-string-edit								Undo last modification made during string editing.	Command Help
undo-mining	X	X	X	X	X	X	X	Unschedule a mined unit.	Command Help
unlink-triangle							X	Interactively erase wireframe triangle data from the current wireframe.	Command Help
unlink-wireframe							X	Remove all wireframe links with a shared LINK attribute value.	Command Help
unload-all-data								Unloads all currently loaded data from memory, and clears the window view.	Command Help
unschedule-period	X	X	X	X	X	X	X	Undo mining on all mined units back to specified period.	Command Help
unsuperimpose-plot								If you have previously used the superimpose-plot command to open a plot file & display its contents in the Design window, you may use the 'unsuperimpose-plot' command to close the plot file and remove it from the Design window.	Command Help
update-vr-objects								Updates the 3D window objects and view according to the status of the objects and view in the legacy Design window.	Command Help
update-vr-objects-only								Updates the 3Dwindow according to the status of objects in the legacy Design window without changing the 3D view settings.	Command Help
update-vr-view								Updates the 3Dwindow according to the status of objects in the legacy Design window without changing the 3D view settings.	Command Help
use-clipping-switch								Turn on or off data clipping limits.	Command Help
use-modelfile-switch								Turn on or off the use of the loaded model slope angle and berm width values when projecting or offsetting strings/perimeters.	Command Help
use-quick-commands-switch								This command can be used to toggle on or off the use of Studio "Quick Keys".	Command Help
use-rosettes-switch	X	X	X	X			X	Turn on or off the use of rosettes in string projection or offsetting.	Command Help
use-secondary-clipping-switch								This command can be used to toggle on or off the use of Studio "Quick Keys".	Command Help
use-tag-switch							X	Toggle the use of tag strings on or off for string linking.	Command Help

Processes - U

Process Name									Description	More Help
UNFOLD		X	X	X	X	X	X	X	Transforms a set of X,Y,Z data into an Unfolded Coordinate System [UCS] as defined by a stratified geological unit.
UNIFCOND	X	X	X	X	X	X	X	X	Performs the process of Uniform Conditioning (UC).
UNLINK									Unlinks a Datamine binary file from the current project.	Process Help